A. Overview

Applicable for all kinds of materials and products in textile, rubber, plastic, synthetic leather, tape, adhesive products, plastic film, composite materials, electronics, metal, and other industries to do stretching, compression, bending, shearing, peeling (90 degrees and 180 degrees), tearing and other tests to determine the quality of the product.

The face mask tension tester has a simple structure, which is easy to operate. It can be placed on the workbench for testing. It adopts an electronic control system, the speed controller regulates the governor motor, and then the T-shaped screw is driven by transmission to drive the loading sensor to rise and fall to complete the tensile or compression test. The real-time force value and displacement are output by the sensor and display in the monitor.

B. Technical Parameters

1.     Pull Strength options: 0-200kg

2.     Accuracy: within ±0.5% of the indicated value

3.     Display Mode: LCD display, Chinese version, film touch keys

4.     Unit: Kg, lb, N

5.     Data Sampling Frequency: 200times/sec

6.     Effective Test Width: 150mm

7.     Effective Stretching Space: 500mm (excluding fixtures)

8.    Test Speed Range: 50-300mm/min step-less speed regulation and 5 speed gears

9.     Displacement Measurement Accuracy: within ±0.5% of the indicated value

10. Breakpoint Ratio Setting: 0～99％, users can set proper breakpoint according to different materials

11.  Workbench Protection: top and bottom travel limit device

12.  Overload Protection: automatic protection will be effective if over 10% of the maximum load

13.  Fixtures: one set of stretching fixtures

14.  Dimension: 450×500×1400mm

15.  Weight: about 60 Kg

16.  Power Supply: 220V/50Hz